Shop Now Get 5% Off
TOOL10 - Instructions for Camber/Castor Gauge
Created: December 12, 2003
CASTOR/CAMBER GAUGE INSTRUCTIONS For all intents and purposes, this gauge can be considered a finely graduated plumb line - as that is exactly what it is! Before proceeding with any measuring for each factor, make sure the vehicle is on reasonably level ground without any wheel being in.
Double Bearing Hub Kit, WC1600
Created: January 29, 2000
Remove the slinger flange from the backing plate. The flange is held on by spot welds and can easily be removed with a cold chisel. Replace the hex headed bolts with the round headed pieces and new nuts mentioned above. Turn the upper return spring so as to give maximum clearance to the new hubs.