Created: February 01, 2006
Frequently Asked Questions about the use of the Pertronix Ignitor systems. The best information available from the experts at Minimania.com
Created: January 31, 2006
Mounting instructions for the '123ignition' type : 123\MINI-R-V & 123\MINI-R-V-A+ for : all 6 & 12 Volt cars, negative earth only ! IMPORTANT Please read the entire instructions before you begin installation. If after reading you are unsure of the procedure to be followed, please ask som...
Created: September 26, 2000
Establishing an accurate TDC reference point is of paramount importance when developing and monitoring ignition timing (and cam timing come to that). When an experienced engine builder assembles an engine - no matter whether for road or race - he will establish an accurate TDC indicator that can be used for ignition purposes.
Created: September 25, 2000
Any deviation away from the original standard engine specification, or where a dizzy from another source is used in the engine you have, the ignition timing will generally be different from that set by the manufacturer.
Created: September 15, 2000
Any dizzy can be set to get maximum power. No problem. Unfortunately that's only one spot on the whole power curve/rpm range. If the curve isn't right elsewhere, the engine will be either loosing power - in some instances by substantial amounts - or detonating its self into oblivion and a costly re-build.