Steel billet pushrods, these are CNC machined on a very special CNC machine from solid high carbon steel and heat treated, central section is larger in diameter to reduce flex at high RPM...
These pushrods are for 1275 engines. 998cc rods are under part number COM795. 8-port head rods are under part number COM796.
Note:
These pushrods DO NOT have pressed in ends that can come loose, they are machined from one piece of steel. About .021" thicker than stock pushrods and about 1 oz. heavier.
These pushrods are for 1275 engines. 998cc rods are under part number COM795. 8-port head rods are under part number COM796.
Note:
These pushrods DO NOT have pressed in ends that can come loose, they are machined from one piece of steel. About .021" thicker than stock pushrods and about 1 oz. heavier.
Question:
What is the “effective length” (bottom of cup at top to bottom of pushrod)?
Answer:
I don't have those specs. These aren't normally stocked but rather special order. Generally, they come in three (3) lengths; suitable for 1275, 998, and with the 8 port Arden heads. These are a better material/design than the factory pushrods.
Spridget Mania Tech Team
The Spridget Parts and Accessories Experts
Steel billet pushrods, these are CNC machined on a very special CNC machine from solid high carbon steel and heat treated, central section is larger in diameter to reduce flex at high RPM...
These pushrods are for 1275 engines. 998cc rods are under part number COM795. 8-port head rods are under part number COM796.
Note:
These pushrods DO NOT have pressed in ends that can come loose, they are machined from one piece of steel. About .021" thicker than stock pushrods and about 1 oz. heavier.
These pushrods are for 1275 engines. 998cc rods are under part number COM795. 8-port head rods are under part number COM796.
Note:
These pushrods DO NOT have pressed in ends that can come loose, they are machined from one piece of steel. About .021" thicker than stock pushrods and about 1 oz. heavier.
Question:
What is the “effective length” (bottom of cup at top to bottom of pushrod)?
Answer:
I don't have those specs. These aren't normally stocked but rather special order. Generally, they come in three (3) lengths; suitable for 1275, 998, and with the 8 port Arden heads. These are a better material/design than the factory pushrods.
Spridget Mania Tech Team
The Spridget Parts and Accessories Experts
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
