× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Light Weight STEEL flywheel! For non-Verto clutch and pre-engaged starter.
"1lb off the flywheel is like taking 200 lbs off the car!" Not quite rational but close. This rule of thumb indicates the importance of flywheel performance. The stock cast iron 1275 flywheel is almost 22 lbs. Even the "S flywheel weighs almost 17lbs. The stock flywheel is "cast" iron and thus not very safe to lighten!
This new "Street" Steel one piece flywheel is 11 lbs. and provides tremendous improvement in acceration! (The full race version C-AEG619 is 8lbs.)
Effects of lightening rotating engine components: (0.5 x n2 x r2 + R2) / R2 n = total gear ratio (gear ratio x diff ratio) r = radius of gyration R = Radius of wheel/tyre This formula gives what accelerative weight the engine sees of the car per lb. Radius of gyration of a transverse engine's flywheel is approx. 3.75" So to determine "weight loss" for a flywheel weight of say 18 lb to 10 lb, the engine would see an overall weight loss of the car to accelerate in first gear of: 3.33 = 1st gear of 4 synchro 'S' box 3.44 = diff ratio (0.5 x (3.33 x 3.34)2 x 3.752 + 9.52) / 9.52 = (0.5 x 131.2 x 14.06 + 90.25) / 90.25 = 1012.59 / 90.25 = 11.22 lbs So for every 1 lb removed from the flywheel, the engine sees 11.22 lbs less to accelerate off of the total car. Therefore by lightening the flywheel by 8 lb, the engine sees a total reduction of the cars accelerative weight of 89.68 lb. Use C-GXE4527 starter with this flywheel ! 
Classic Austin Mini Light Weight Flywheel Non Verto For Pre Engaged Starter

Classic Austin Mini Light Weight Flywheel Non Verto For Pre Engaged Starter

Classic Austin Mini Light Weight Flywheel Non Verto For Pre Engaged Starter
Part No: C-AEG420
$309.95
Qty:
Fits the following:
Classic Mini
Alternate Products
Classic Austin Mini Ultra Light Flywheel For Pre-engaged Non-verto
$314.95 Classic Austin Mini Ultra Light Flywheel For Pre-engaged Non-verto
Light Weight STEEL flywheel! For non-Verto clutch and pre-engaged starter.
"1lb off the flywheel is like taking 200 lbs off the car!" Not quite rational but close. This rule of thumb indicates the importance of flywheel performance. The stock cast iron 1275 flywheel is almost 22 lbs. Even the "S flywheel weighs almost 17lbs. The stock flywheel is "cast" iron and thus not very safe to lighten!
This new "Street" Steel one piece flywheel is 11 lbs. and provides tremendous improvement in acceration! (The full race version C-AEG619 is 8lbs.)
Effects of lightening rotating engine components: (0.5 x n2 x r2 + R2) / R2 n = total gear ratio (gear ratio x diff ratio) r = radius of gyration R = Radius of wheel/tyre This formula gives what accelerative weight the engine sees of the car per lb. Radius of gyration of a transverse engine's flywheel is approx. 3.75" So to determine "weight loss" for a flywheel weight of say 18 lb to 10 lb, the engine would see an overall weight loss of the car to accelerate in first gear of: 3.33 = 1st gear of 4 synchro 'S' box 3.44 = diff ratio (0.5 x (3.33 x 3.34)2 x 3.752 + 9.52) / 9.52 = (0.5 x 131.2 x 14.06 + 90.25) / 90.25 = 1012.59 / 90.25 = 11.22 lbs So for every 1 lb removed from the flywheel, the engine sees 11.22 lbs less to accelerate off of the total car. Therefore by lightening the flywheel by 8 lb, the engine sees a total reduction of the cars accelerative weight of 89.68 lb. Use C-GXE4527 starter with this flywheel ! 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Flywheels & Clutch page 40
Created: December 21, 2018
View the selection of Flywheels & Clutches for the Classic Mini Cooper from the Mania Catalog as a PDF. Find a Part No. in the catalog. Type or copy/paste it into the search box to find it on the website.
Austin Mini Flywheel Problems
Created: September 11, 2012
When installing a flywheel onto a engine/crankshaft I strongly recommend that you "lap the interface surface" between the flywheel and crank. The objective of this process is to insure an absolute perfect fit on the tapper. If for any reason this is not the case you will probably NOT be able t...
Austin Mini FLYWHEEL & CLUTCH- General information
Created: November 27, 2000
If there's one subject that gets washed over when transplants or modifications are discussed its the flywheel and clutch assembly. There also seems to be a widely held belief that up-rating an engine from anything other than standard automatically requires a ‘competition clutch’. This, as with many other subjects concerning the Mini, is a myth.
Austin Mini Cooper Flywheel - Pre-Verto types
Created: November 21, 2000
With the exception of the fact the two-piece flywheel is two pieces bolted together - this and the later one-piece cast item can be treated as the same thing. They will universally fit all transverse engine cranks from 1964 onwards, so that should be easy enough. If all you can get is the hulking great 1300 type, then this too is as universal to fit, but I highly recommend you get that extra cast lump machined off of the outer edge as a bare minimum.
Classic Mini Flywheel and Clutch Identification
Created: March 08, 2009
Austin Mini flywheel and clutch identification is explained and illustrated with color photos of early vs. later designs.