× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Exhaust valve. 1.22" (31mm) x 3.52".

As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or worse yet, confuse the parts-guy when it is time to order new valves! Be aware that if the head has been worked on previously, it may have oversize valves; it may have undersize if seats have been installed. Unless you are 100% sure what is in your cylinder head, it is a good idea to remove a valve for accurate measurement. There are two lengths used (nominally 3.52" & 3.57") three different keepers, (wide, narrow, and three-groove) and many different head diameters! These valves are in stock at Mini Mania!

Note that 12G1316 (Smog-Type), all variations of the 12G940, and the latest CAM head castings all use the following 3.57" long valves. Early Cooper S valves If your 970cc, 1071cc, or early 1275cc Cooper S still has the original AEG163 head casting, you must use short, 3.52" valves.

Exhaust Valve 1.21"x 3.52" Small Keeper | Classic Mini | Sprite & MG Midget | Morris Minor

Exhaust Valve 1.21"x 3.52" Small Keeper | Classic Mini | Sprite & MG Midget | Morris Minor

Exhaust Valve 1.21"x 3.52" Small Keeper | Classic Mini | Sprite & MG Midget | Morris Minor
Part No: AEG594
$66.95
Qty:
Fits the following:
Classic Mini
Sprite & MG Midget
Morris Minor
Alternate Products
A Series Exhaust Valve 1.21 x 352 Small Keeper Aftermarket
$20.95 A Series Exhaust Valve 1.21 x 352 Small Keeper Aftermarket
Classic Austin Mini Exhaust Valve 30.9mm 1.22 X 3.57 Small Keeper
$33.95 Classic Austin Mini Exhaust Valve 30.9mm 1.22 X 3.57 Small Keeper

Exhaust valve. 1.22" (31mm) x 3.52".

As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or worse yet, confuse the parts-guy when it is time to order new valves! Be aware that if the head has been worked on previously, it may have oversize valves; it may have undersize if seats have been installed. Unless you are 100% sure what is in your cylinder head, it is a good idea to remove a valve for accurate measurement. There are two lengths used (nominally 3.52" & 3.57") three different keepers, (wide, narrow, and three-groove) and many different head diameters! These valves are in stock at Mini Mania!

Note that 12G1316 (Smog-Type), all variations of the 12G940, and the latest CAM head castings all use the following 3.57" long valves. Early Cooper S valves If your 970cc, 1071cc, or early 1275cc Cooper S still has the original AEG163 head casting, you must use short, 3.52" valves.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Intake & Exhaust Valves & Cam Followers - 30
Created: January 03, 2019
Standard Production & Competition Valves for all Classic Mini cylinder heads available in sizes to fit. Over-sized options with various collet designs will suite every need. Cam followers both stock, High Performance or race versions are also available.
Do I need to do a Valve Job on My Classic Mini?
Created: April 25, 2014
Most motors will go at least 80,000 miles before "needing a valve job"! But what are the signs? How do I determine if I really need it? Do I do it myself or pay a local machine shop.
Valve Stem Keepers
Created: October 10, 2011
Call them cotters, collets or keepers, these little items are often overlooked during a head rebuild. If yours are worn and need to be replaced, make sure you order the right ones. Minis used three different versions over the years.