OIL FILTER CANNISTER SOCKET - MINI COOPER AND S

Does NOT fit 2007+ R56 Hardtops.

Filter change tips: Use this 36mm socket with a ratchet to remove the canister. It helps to 'loosen' the canister a bit when you drain the oil to help drain the filter (for less mess). Make sure you replace the o-ring with the new one supplied with the filter - apply a coat of fresh oil on the o-ring when you install it and tighten the filter housing to 18 ft. lbs.

Remember to use sythetic motor oil. MINI recommends 5W-40 or 5W-30 FULL SYNTHETIC motor oil.

Tighten the drain plug to 18 ft-lb. Start the engine and check for oil pressure. Don't forget to check for leaks too!

And darn it, dispose of the used oil and filter properly, please. And wipe that oil off the driveway before you track it into the house!