
Search:	Search: Car Type:

My Wish List

View Cart

Click Image for Larger View

131ADDCO SWAY BAR 3/4 FRONT for SPRIDGET

Click Image for Larger View

SWAY BAR 3/4 FRONT for SPRIDGET

3/4" front sway bar for all Spridgets, complete with all mounting hardware. A car has 'neutral' steering if while turning in a tight circle at moderate speed the car will complete the circle at approximately the same position. A car has 'understeer' if turning the same tight circle at moderate speed the diameter of the circle increases because of the front wheels pushing out. A car with 'oversteer' will decrease the diameter due to the rear wheels sliding out. Production cars are designed to 'understeer' since, in the minds of the engineers, this is safer and easier to control; lifting your foot off the gas pedal will stop the understeering. A basic rule of thumb, ignoring the effects of tires, horsepower, etc.; if the car oversteers (back-end slides) you should increase the size of the FRONT sway bar, if it understeers increase the size of the REAR sway bar. You can look at changing the size (or installing) a sway bar in two ways; if the car 'pushes' at the front you install a (bigger) bar at the rear to force it to have less traction, making the car more neutral, or the technically correct logic says that you are changing the weight transfer characteristics of the front by transferring more load to the rear. The stock Bugeye was not supplied with any sway bar, later Spridgets had a small front sway bar. This minimized the tendency of the car to be tail happy (spin-out oversteer). The higher your expectations, the higher the horsepower, the bigger the tires, the more you will want to adjust the sway bars.

$249.95

QTY:

Part No:

Car(s): SPRITE

This is Special Order Only Item!

One or more Information, Installation or Applicaition Article is available for this item.

Also Purchased

May we Suggest

Tech Information

Shipping Info

Warranty

Price Guarantee

Customers that bought 131ADDCO also purchased the following:

WHEEL STUD LUG STANDARD 1 1/2

GROSE JET FLOAT NEEDLE AND SEAT

POLY UPPER ADJUST BUSHING shock end offset(Set of 4)

BUSH POLY FRONT TOP TRUNION SPRIGET

BUSH POLY LOWER 'A' ARM

BUSH SWAY BAR 3/4 PAIR FOR SPRITE OR MIDGET

Create a review

Post Anonymously

Name:

You don't need an account to post reviews. Simply enter a name above, a review below, and then submit.

OR
Login to post from your user account

Login:

Password:

Create new account

Rating:

Review Title

Review

Type What you See Above:

Can't read the image above? Click Here for a new one.

Morris Minor Parts

Minor Diagrams (PDF)

Spridget Diagram Catalog

Engines

Search Products

SWAY BAR 3/4 FRONT for SPRIDGET