× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

For Negative ground applications only.
Tachometers If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC1006) or 10,000 RPM (RVC1004) version, the classic looking 3" diameter tach has a chrome bezel and red shift pointer.

Typical wiring resuts in green wire to positive side of coil, red wire to negative side of coil, black wire is ground and the red with white tracer wire goes to the light circuit of your car.

Classic Mini smith tachometer 80MM / 3 10K rpm

Classic Mini smith tachometer 80MM / 3 10K rpm

Classic Mini smith tachometer 80MM / 3 10K rpm
Part No: RVC1004
$288.95
Qty:
Fits the following:
Classic Mini
Sprite & MG Midget
Morris Minor
Alternate Products
Classic Mini Smiths Electronic Impulse Tachometer 8k Magnolia 80MM
$288.95 Classic Mini Smiths Electronic Impulse Tachometer 8k Magnolia 80MM
Classic Austin Mini Tachometer smiths 10K Magnolia
$288.95 Classic Austin Mini Tachometer smiths 10K Magnolia

For Negative ground applications only.
Tachometers If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC1006) or 10,000 RPM (RVC1004) version, the classic looking 3" diameter tach has a chrome bezel and red shift pointer.

Typical wiring resuts in green wire to positive side of coil, red wire to negative side of coil, black wire is ground and the red with white tracer wire goes to the light circuit of your car.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Tachometer Conversion
Created: January 30, 2000
Positive to Negative Ground Conversion In addition to the tools required to remove the tachometer from the dash, you will need the following: 1) soldering iron & solder (keep in mind that electronics are heat sensitive, so be careful to use a low-wattage iron or use heat sinks to localize the heat.)